Craftsman 358341140 electric chainsaw

User Manual - Page 16

For 358341140.

PDF File Manual, 18 pages, Download pdf file

Loading ...
Loading ...
Loading ...
LeftSide
Front Handle
Saw Chain.
Manual Oiler Control
Switch Lockout
Rear Handle
Guide Bar
Power Cord
Right Side
_o_'nting Pad
/_ Sprocket J _- Spocket Guide
Bar Tip Guide - An attachmentthat
may be providedon the end ofthe guide
barto preventthe chain at the end ofthe
_uide barfrom contactingthe wood.
cking- The process of crosscutting
a felled tree or log into lengths.
Chain Brake -A device usedto stop
the chain saw.
Chain Saw Powerheed - A chain saw
withoutthe saw chain and guide bar.
Clutch - A mechanism for connecting
and disconnectinga driven member to
and from a rotatingsource of power.
Ddve Sprocket or Sprocket - The
toothedpart that drivesthe saw chain.
-elling- The process ofcuttingdown a
tree.
Felling Back Cut --The finalcut in a
tree fellingoperation made on the op-
posite ofthe tree from the notchingun-
dercut.
Front Handle - The supporthandle lo-
cated at or toward the front of the chain
saw.
Front Handle Guard - A structuralbar-
der between the front handle ofa chain
saw and the guide, typ!callylocated
dose to the hand positiononthe front
.handle and sometimes employed as an
=aGtivating leverfor a chain brake.
Guide Bar- A solidrailedstructurethat
supportsand guidesthe saw chain.
Kickback- The backward or upward
motion,or bothofthe guide bar occur-
ringwhen the saw chain near the nose
ofthe top area ofthe guide bar contacts
any objectsuchas a log or branch, or
when the wood closes in and pinches
the saw chain in the cut.
Kickback, Pinch - The rapid push-
back ofthe saw whichcan occurwhen
the wood closes in and pinches the
movingsaw chain inthe cut alongthe
top of theguide bar. _
Kickback, Rotational The rapid up-
ward and backward motionof the saw
which can occur when the movingsaw
chainnear the upperporllon ofthe tipof
the guide bar contacts an object,such
as a log or branch.
Low-Kickback Chain - A chain that
complieswith the kickbackperfor-
mance requirementsofANSI
B175.1-1991 when tested on a repre-
sentativesample of chainsaws.
Normal Cutting Position _'nThose
positionsassumedin performing the
buckingand fellingcuts. '
Notching Undercut - A notchcutin a
tree that directsthe tree's fall.
Continued on next page
16
Loading ...
Loading ...