Loading ...
Loading ...
Loading ...
Operation
68
Cleaning the steam oven
Risk of injury caused by hot wa-
ter.
At the end of a steam cooking pro-
gramme, hot water left in the steam
generator is pumped back into the
water container.
Take care not to tip the water con-
tainer when taking it out of the appli-
ance.
Remove the water container as re-
quired.
Remove the spill guard and empty
the water container.
After each use, clean and dry the
whole steam oven as described in
“Cleaning and care”.
Make sure the spill guard engages
correctly when installing it.
Leave the appliance door open until
the oven compartment is completely
dry.
Refilling the water
If water needs replenishing during the
programme, a tone will sound and the
display will prompt you to refill the con-
tainer with fresh water.
Take out the water container and re-
plenish the water.
Push the water container into the ap-
pliance.
The cooking programme is resumed.
Changing values and settings
for a cooking programme
Depending on the function, as soon as
a cooking programme is in progress,
you can change the values or settings
for this programme.
Depending on the function, you can
change the following settings:
- Temperature
- Power level
- Duration
- Finish at
- Start at
Changing the temperature
You can permanently set the recom-
mended temperature to suit your
cooking preferences in Settings| Re-
commended temps..
Touch the temperature display.
Change the desired temperature.
Confirm withOK.
The cooking programme will restart with
the new desired temperature.
Loading ...
Loading ...
Loading ...