Loading ...
Loading ...
Loading ...
Base unit
1 MCIDN
2 Press M
CN to search from the most recent call,
or MDN to search from the oldest call.
3 To call back, press MCELL 1N or MCELL 2N,
then lift the corded handset.
To exit, press MEXITN.
n Using a landline
Handset / Base unit
1 Proceed with the operation for your unit.
Handset: M
CN CID
Base unit: MCIDN
2 Press M
CN to search from the most recent call,
or MDN to search from the oldest call.
3 Proceed with the operation for your unit.
Handset:
– To call back, press M
N.
– To exit, press MOFFN.
Base unit:
– To call back, lift the corded handset.
– To exit, press MEXITN.
Note for handset and base unit:
R If the entry has already been viewed or
answered, “
” is displayed.
– or indicates the caller information was
received from the cellular line.
– “
” or “ ” indicates the caller information
for blocked calls.
Editing a caller’s phone number
Y
ou can edit a phone number in the caller list by
removing its area code and/or the long distance
code “1”.
Handset
n W
hen a cellular phone is paired:
1 M
CN CID
2 M
bN: Select the desired entry. a MSELECTN
3 Press * (Edit) repeatedly until the phone
number is shown in the desired format.
4 Using a cellular line:
To make a cellular call, continue from step
4, “Viewing the caller list and calling back”,
page 57.
Using a landline:
M
N
n When a cellular phone is not paired:
1 M
CN CID
2 M
bN: Select the desired entry. a MMENUN
3 M
bN: “Edit” a MSELECTN
4 Press MEDITN repeatedly until the phone
number is shown in the desired format.
5 M
N
Base unit
1 MCIDN
2 M
bN: Select the desired entry.
3 Press MEDITN repeatedly until the phone
number is shown in the desired format.
4 Using a cellular line:
Press MCELL 1N or MCELL 2N, then lift the
corded handset.
Using a landline:
Lift the corded handset.
Caller ID number auto edit feature
Handset / Base unit
Once you call back an edited number, the unit
which was used to call back remembers the area
code and format of the edited number. The next
time someone calls from the same area code,
caller information is customized by the unit as
follows:
– When the call is being received, the Caller ID
number is displayed in the same format as the
edited number.
– After the call has ended, the caller’s phone
number is displayed in the same format as the
edited number, when reviewed from the caller
list.
For example, you can use this feature to set the
unit to ignore the area code of callers in your area,
so that you can call these local numbers using
caller information without dialing the area code.
To activate this feature, you must edit an entry in
the caller list, then call that number. After that,
phone numbers from that caller’s area code are
edited automatically.
This feature can be set for each unit (page 50).
The default setting is “On”.
Note:
R Phone numbers from the 4 most recently edited
area codes are automatically edited.
58
For assistance, please visit http://shop.panasonic.com/support
Caller ID Service
TGF88x(en)_1104_ver033.pdf 58 2019/11/05 13:22:55
Loading ...
Loading ...
Loading ...