Loading ...
Loading ...
Loading ...
– between handsets
– between a handset and the base unit
Handset
1 MMENUN#268
2 M
bN: “On” a MSELECTN
3 M
bN: Select the desired unit’s number to
monitor with. a MSAVEN
R “Baby monitor” will be displayed.
R The registered unit’s name/number is
displayed.
Note:
R When this feature is on, another handset or the
base unit can hear the monitored handset by
making an intercom call.
To monitor from outside
If you enable this feature, the unit will call a
pre-programmed phone number when the handset
detects sound. After you answer the call, you can
listen in on the room where the handset is located.
This feature is only available for landline.
Handset
n From the phonebook:
1 MMENUN#268
2 MbN: “On” a MSELECTN
3 M
bN: Select “Outgoing call” to monitor
from outside. a MADDN
4 M
bN: “Phonebook” a MSELECTN
5 M
bN: Select the phonebook entry. a MSAVEN
R “Baby monitor” will be displayed.
Note:
R If you edit a phonebook entry which is assigned
for monitoring, the edited entry does not transfer
to the monitor.
n By entering phone numbers:
1 MMENUN#268
2 M
bN: “On” a MSELECTN
3 M
bN: Select “Outgoing call” to monitor
from outside. a MADDN
4 M
bN: “Manual” a MSELECTN
5 Enter the desired name. a MOKN
6 Enter the desired number. a MOKN a
MSELECTN
R “Baby monitor” will be displayed.
Note:
R The registered name/number is displayed.
Turning off the baby monitor
The monitored handset cannot be used while baby
monitor is set to “On”.
Handset
1 P
ress MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “Off” a MSELECTN a MOFFN
Editing an outside monitoring number
Handset
1 Press MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “On” a MSELECTN
4 M
bN: Select the outside line. a MMENUN
5 M
bN: “Edit” a MSELECTN
6 Edit the name if necessary. a MOKN
7 Edit the phone number if necessary. a MOKN
a MSELECTN
Erasing an outside monitoring number
Handset
1 Press MMENUN on the handset being
monitored.
2 M
bN: “On/Off” a MSELECTN
3 M
bN: “On” a MSELECTN
4 M
bN: Select the outside line. a MMENUN
5 M
bN: “Erase” a MSELECTN
6 M
bN: “Yes” a MSELECTN a MOFFN
Baby monitor sensitivity
You can adjust the sensitivity of the baby monitor.
Increase or decrease the sensitivity to adjust the
sound level needed to trigger the baby monitor
feature.
R This feature cannot be set during a monitoring
call.
Handset
1 Press MMENUN on the handset being
monitored.
54
For assistance, please visit http://shop.panasonic.com/support
Programming
TGF88x(en)_1104_ver033.pdf 54 2019/11/05 13:22:55
Loading ...
Loading ...
Loading ...