Loading ...
Loading ...
Loading ...
20
INSTALL THE FLAVOR GRIDS
Place the fl avor grids directly onto the studs on the burners.
See Fig. 20-1. The fl avor grids allow heat from the burners
to be evenly distributed throughout the cooking area. They
are stainless steel and will heat and cool quickly, making
your grill very responsive to the changes you specify in grill
temperature. They are rust resistant and may be cleaned
with standard oven cleaners. Some discoloring will be seen
with use. This is normal for stainless steel and does not
affect the function,
INSTALL THE RIGID SHELVES
This grill comes with two (2) rigid shelves that must be
attached. These can be attached using the four support
screws provided and a Phillips-head screw driver.
Important: Take caution to not cross-thread when
tightening the screws.
1. Hold the shelf inverted so that one of the corner holes
in the shelf lines up with the appropriate upper screw
hole in the grill.
2. Insert the screw, but do not tighten all the way so that
the shelf can be easily rotated around the fi rst screw.
3. Line up the second corner hole in the shelf with the
remaining upper screw hole in the grill. Insert a screw
and tighten.
Note: You may lift the edge of the shelf upward to gain
better access during much of the tightening of
this screw.
4. Finally, insert the bottom screws on the left and right
side of the shelf and securely tighten all screws.
To detach, reverse the process above.
Fig. 20-2 View from under right shelf
Shelf support screws
Fig. 20-1 Install fl avor grids
Place onto studs
FLAVOR GRID & RIGID SHELF INSTALLATION
Loading ...
Loading ...
Loading ...