Loading ...
Loading ...
Loading ...
15
Fig. 15-3 Post base option
INSTALLATION
PREPARE FOR INSTALLATION
Consult a qualifi ed professional installer.
The fl ex connector can be routed out the back of the
post, under the post base, or inside the post.
To gain access to the inside of the post, unscrew and
carefully open the access plate on the rear of the post
using a medium Phillips-head screwdriver. Retain the
screws.
ROUTE FLEX CONNECTOR
The gas supply line will need to be run to the post install
location as appropriate for the desired setup.
To route fl ex connector through rear of post:
1. Remove a knock-out disk at the bottom of the access
plate with a large fl athead screwdriver. (Insert the
screwdriver into the notch provided in the center
of the knock-out.)
2. Remove the plastic grommet (attached to the fl ex
connector) and insert it into the newly created
opening. Then route the fl ex connector through the
opening. See Fig. 15-1 and 15-2.
To route fl ex connector beneath post base:
Route the fl ex connector through the hole found beneath
the center of the post base (see Fig. 15-3).
Fig. 15-1 Access plate view & install orientation
Access
plate
Fig. 15-2 Post interior detail
Gas supply knock-out
(grommet installed)
Flex
connector
(w/ adapter)
Back of
timer valve
Flex
connector
(w/ adapter)
Regulator
PATIO MOUNT INSTALLATION
Loading ...
Loading ...
Loading ...