Loading ...
Loading ...
Loading ...
ENGLISH
Installation Manual 87
ROTARY 01 ROTARY 02
0
0
• Operation: Turn dip S/W No.1 on.
• Display: "11" is displayed in 7-SEG
No.
1
2
Display and Setup Setup and Contents
• Operation: Turn dip S/W No.1 on.
• 7-SEG disappeared
7-SEG SW01M
7-SEG SW01M
• Operation: more than 2 dip switches turned on.
• Display: "Er" is displayed in 7-SEG
No.
1
Display and Setup Setup and Contents
7-SEG SW01M
(In case that an indoor unit of central control address "11" is connected to a valve #1 of an HR unit)
1) Wait for 5 minutes, after Pipe detection is completed.
2) Turn on the No.10,14,16 DIP S/W of SUB PCB at master unit
3) Check the data on 7- segment, switching rotary 01,02.
The connected port number of HR unit
The connected HR unit number
The auto addressing number of indoor unit (digit of 1)
The auto addressing number of indoor unit (digit of 10)
HR Unit PCB
Method of checking the pipe detection result at HR unit
Method of checking the pipe detection result at outdoor unit
Identification of Manual Valve ID (Address)
Loading ...
Loading ...
Loading ...