Loading ...
Loading ...
Loading ...
Troubleshooting
Service Tones
If the electronic oven control sounds a series of
short, rapid beeps for over 16 seconds and the
display shows a F-code, record the F-code
shown, disconnect the electrical supply to the
range and contact an authorized servicer.
F-codes are diagnostic service codes which
indicate a part of the control or oven must be
checked by an authorized servicer.
Answers to Commonly Asked Questions
Should the oven maintain a constant
temperature on an oven thermometer?
To maintain a temperature for baking, the oven
will cycle on and off. The temperature may vary
250 higher or lower than the set temperature.
Is there a problem if the oven smokes the first
few times it is turned on?
Some minor smoking is normal when using the
oven for the first time. It is cause by a nontoxic
protective coating applied to the inside of the
oven cavity burning off.
Should there be an odor or smoke while self-
cleaning the oven?
There will be some smoke and odor during the
first few cleaning cycles. If there is excessive
smoke or odors, too much solid may have been
left in the bottom of the oven. Tum the cleaning
cycle off, wait for the oven tocool and wipe away
the excess soil. Reset the cleaning cycle.
Can the timer be used during automatic
cooking?
The timer can be used at any time. The timer
functions independently from the oven cooking
functions. The timer should always be canceled
using the MINUTE TIMER button to avoid
canceling the cooking function.
Pressing the cancel button may cancel the
F-code and allow a cooking function to be
reset. If the failure code continues to
occur, an authorized servicer must be
contacted to check the oven.
i
22
Loading ...
Loading ...