Loading ...
Loading ...
Loading ...
PROBLEM
Excessive belt
wear
CAUSE
Loose belt.
Tight belt.
Loose pulley.
Pulley misalignment.
Squealing Compressor pump has
sound no oil.
Loose belt.
Oil and/or
moisture in
tank and/or air
lines
Water condensation
Oil blow-by in pump
CORRECTION
Loosen wingnut and then tighten
wingnut until it contacts the washer
plus one turn.
Loosen wingnut and then tighten
wingnut until it contacts the washer
plus one turn.
Have checked by a Trained Service
Technician.
See Motor Pufley/Flywheel
Alignment paragraph in the
Maintenance section.
See Oil-Checking paragraph in the
Maintenance section.
Loosen wingnut and then tighten
wingnut until it contacts the washer
plus one turn.
It is normal for oil lube air
compressor pumps to release some
oil into the tank and air lines. Air
compressors will also generate
water condensation that will form in
the tank and air lines. Install water
and oil filter traps when needed.
The Typical Compressed Air
Distribution System paragraph
under Installation provides a
guideline. Contact a Trained Service
Technician for more information.
iMPORTANT: If the tank or air lines
have excessive water and/or oil,
contact a Trained Service Technician.
24-ENG
Loading ...
Loading ...
Loading ...