Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_073 REV. B
04/15/2020Page 28 of 54
3/8” O.D. HOSE
(Provided)
3/8” union
adapter
(Provided)
DRAIN CONNECTION
CAUTION: NO MATTER WHAT DRAIN
OPTION IS USED WE SUGGEST
THOROUGHLY INSPECTING ALL
CONNECTIONS AFTER INSTALLED TO
ASSURE THERE ARE NO LEAKS.
The True Ice
®
machine has a built-in drain pump
that will pump water up to a drain point, such as
a sink.
• Eight feet of 3/8" O.D. plastic tubing is
supplied with the ice machine.
• The drain pump has a maximum rise of 8
feet (2.4 m) and a maximum run of 100 feet
(33 m).
If higher than 8 feet, an optional pump may
be required.
• The floor drain must be large enough to
accommodate drainage from all drain lines.
• The drain pump discharge line must terminate
at an open site drain.
OTHER DRAIN CONNECTIONS
To accommodate your installation we have also
provided a few pieces which allow for different
drain configurations:
Fitting 1 - 3/8” to 3/8” union adapter
CAUTION: FOR CONNECTION TO WORK
AS DESIGNED, TUBING SHOULD BE
CUT AT PERFECT 90º DEGREE ANGLE
BEFORE INSTALLING ON UNION ADAPTER.
Fitting 2 - 3/8” O.D. to 1/2” ID barb fitting.
OPTION 1
Extending current 3/8” O.D. drain line.
• To do this install, use provided 3/8” O.D.
union adapter.
CAUTION: THIS MUST NOT BE EXTENDED
MORE THEN 100 FOOT RUN OR HIGHER
THAN AN 8 FOOT RISE.
OPTION 2
Adapting provided 8 foot 3/8” O.D. drain line to
1/2” I.D. / 5/8” O.D. drain line.
• To do this connect 3/8” union adapter to
current drain line. (Make sure drain line is cut
at perfect 90º degree angle before installing
union adapter).
• Push smooth end of barb fitting into the
3/8” O.D. union adapter & then connect
1/2” I.D. / 5/8” O.D. to barbed end of plastic
fitting securely.
NOTE: 1/2” I.D. / 5/8” O.D. TUBING NOT
PROVIDED.
CAUTION: IF THIS OPTION IS CHOSEN, THE
MAXIUM PUMP RISE IS 4 FOOT.
3/8” push to
1/2” I.D. barb
(Provided)
5/8” O.D. HOSE
(Not provided)
3/8” O.D. HOSE
(8 ft. provided)
3/8” O.D. HOSE
(Additional not
provided)
3/8” union
adapter
(Provided)
Loading ...
Loading ...
Loading ...