Loading ...
Loading ...
Loading ...
,m
Maintenance(Continued)
WARNING
DONOTattempt anyadjustments, maintenance,service or
repairswith the engine running. STOPengine.STOPblade.
Engageparking brake. Removekey.Removespark plug
wire from spark plug and secureaway from plug. Engine
and components are HOT.Avoid serious burns, allow all
parts to cool beforeworking on machine.FuelFillerCap
and vent must beclosed securelyto prevent fuel spillage.
Service- Every25 OperatingHours
(Continued)
Battery Fluid Level
1. Removethe battery. Referto the section entitled
"BATTERYREMOVAL".
2. Removethe battery caps. Checkthe fluid level.
3. Addwater only to bring fluid to proper level. DONOT
OVERFILL.
4. Reinstallthe battery. Referto the section entitled
"BATTERYINSTALLATION".
MowerDeckLevelness
Checkthe mower deckfor proper level. Adjust as required.
Refer to the section entitled "MOWERDECKADJUSTMENT-
LEVELNESS".
CleanMower Deck
1. Followthe WARNINGstatementfound on this page.
2. Checkthe fuel levelin the tank. If over 3/4 full, remove
the tank. Referto the section entitled "REMOVINGFUEL
TANK". If 3/4 or less, proceedto the next step.
3. Carefullystand the RearEngineRider on the rear
bumper.
4. Cleanthe undersideof the mower deck, removing all
accumulation of grass clippings and debris.
5. Cleanthe top of the deck, removing all grass clippings
and debris.
Mower Blade Spindle - Lubrication
1. Followthe WARNINGstatementfound on this page.
2. Checkthe fuel levelin tank. If over 3/4 full, removethe
tank. Referto the section entitled "FUELTANK
REMOVAL".If 3/4 or less, proceedto the next step.
3. Carefullystand the RearEngineRider on the rear
bumper.
4. Lubricate the spindle greasefitting (A, Figure24) with
three shots of general purposegreasefrom a grease
gun.
IMPORTANT:If the RearEngine Riderwill be on its rear
bumper for longer than two hours, removethe battery. Refer
to the section entitled "BATTERYREMOVAL".
Mower Deck Linkage - Lubrication
Lubricateall mower deck linkage pivot points with a light
coat of motor oil.
®
/
Figure24. Mower blade spindle greasefitting
FrontWheel Bearing - Lubrication
Lubricatethe front wheelgreasefittings (A, Figure 25) with
five shots of general purpose grease,from a greasegun.
Figure25: Front wheelgrease fitting
Shift Lever - Lubrication
Lubricatethe shift levergreasefitting (A, Figure 26) with
two shots of general purpose greasefrom a greasegun.
Figure26: Shift levergrease fitting
16 www.snapper.com
Loading ...
Loading ...
Loading ...