Loading ...
Loading ...
Loading ...
Operation(Continued)
WARNING
Onceblade is disengaged,it should come to a complete
stop in 3 secondsor less. If the blade continues to rotate
after 3 seconds, the blade brake must be adjusted. Refer to
Section "BLADE BRAKEADJUSTMENT"for adjustment pro-
cedures or return machineto an authorized SNAPPERdeal-
er for adjustment. DONOTCONTINUEto operate machine
until blade brakeis adjusted and functioning properly.
StartingandOperation(Continued)
Mower Blade
1. With the enginerunning, move the engine speedcontrol
to the "FAST"position.
2. Movethe bladelever (A, Figure 18) forward to the "ON"
position, then depressthe blade pedals(B) to hold the
blade lever in the "ON" position.
1
Figure 10.Engaging themower blade
Wheel Drive
1. With the enginerunning, adjust the engine speedcontrol
to the "FAST"position.
2. Depressthe clutch/brake pedal (A, Figure 11).
3. Placethetransmission shift lever(A, Figure 12) into
the first forward speednotch (B).
4. Releasethe clutch/brake pedalto begin forward motion.
5. During forward motion, the transmission shift lever
may be placedin anydesired forward speedwithout
depressing the clutch/brake pedal.
NOTE. For best cutting results, move the transmission shift
lever into a slow forward speedand the enginespeed control
to a fast position. Thiscombination will allow themower
blades to lift thegrass whilecutting smoothly and evenly.
WARNING
DONOToperateblades in reverse.STOPBLADES.LOOK
and SEEbehind and down for children, pets and hazards
before and while backing.
Figure 11.Engagingthe clutch/brake pedal
//
I
Figure 12: Transmissionshift lever
m.
Loading ...
Loading ...
Loading ...