Loading ...
Loading ...
Loading ...
Problem solving guide
75
Problem Cause and remedy
The FlexiClip runners do
not push in or pull out
smoothly.
The bearings in the FlexiClip runners are not
sufficiently lubricated.
Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed for the
high temperatures in the oven compartment. Other
lubricants may resinify when heated and will gum
up the FlexiClip runners. You can obtain the
special Miele lubricant from your Miele dealer or
from the Miele Customer Service Department.
There is still soiling in
the oven compartment
after a pyrolytic clean-
ing programme.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
Remove the ash using a damp microfibre cloth or
with a clean sponge and a solution of hot water
and washing-up liquid.
If there is still coarse soiling left in the oven after
the pyrolytic cleaning programme you should start
the programme again, selecting a longer duration if
necessary.
The oven interior light-
ing switches off after a
short time.
You have selected theLighting| “On” for 15 seconds
setting.
If you want the oven interior lighting to be
switched on during the entire cooking programme,
select theLighting| On setting.
The oven interior light-
ing is off.
You have selected theLighting| Off setting.
Press the sensor control to switch on the oven
interior lighting for 15seconds.
If required, select theLighting| On or“On” for 15
seconds setting.
Loading ...
Loading ...
Loading ...