Loading ...
Loading ...
Loading ...
F1
F1
- Heating zone indicator
G
- Key cooking area selection
F
- Cooking area display
H
- Lock-key
B
- Key On/Off
A
- Key (-)
D
- Key (+)
C
- Key-lock on/off pilot light
E
- Key for double zone selection
L
- Touch selection pad F for the desired cooking zone, a ashing “0” will appear on the respective
display.
- A zone may be switched on by activating the “+” or “-” sensor within 10 seconds. If sensor D is
used, the display will show selection 9, while if sensor C is used, the display shows selection 1 or 5,
depending on the model.
- Once this operation has been performed choose the temperature adjustment with the “+” or “-”
pads.
- Zones can be individually switched o , select the zone by touching pad F, select “0” with the D
sensor, after 3 seconds the cooking zone is automatically switched o . It is always possible to switch
a plate o by touching the “+” and “-” sensors at the same time.
-The cooktop can be switched o by touching the main start-up sensor (Fig.4-5-6-7-8 A). If all the
plates are selected on “0” the cooktop will switch o after 10 seconds.
-If the cooktop is equipped with plates with an extension ( g.5-7-8) switching on of the outer zone
can be activated as follows.
- Check that the cooktop is not locked.
- Touch the On/O Pad “A” to switch the cooktop on.
- Choose the desired zone and adjust the power using the “+” or “-” pads.
- Once the power has been adjusted touch pad (L) to activate the double area.
- To deactivate the double zone select the appropriate zone ( g.5-7-8 F) and touch the pad ( g.5-7-8
L).
- If an object is placed above the controls, the cooking cooktop will automatically move to the OFF
position.
Fig. 7
- 9 -
Loading ...
Loading ...
Loading ...