Loading ...
Loading ...
Loading ...
Electrical connectionS (Fig.2)
L
3
L
2
L
1
220-240V 3~ H05V2V2-F 4G 2.5mm
2
N
L
1
L
2
L
3
380-415V 3N~ H05V2V2-F 5G 2.5mm
2
L
N
220-240V 1N ~ H05V2V2-F 3G 2.5mm
2
L
2
L
1
N
380-415V 2N~ H05V2V2-F 4G 2.5mm
2
L
1
L
2
220-240V 2~ H05V2V2-F 3G 2.5mm
2
4321
43
L3
L2
21
L1
L2
L1
4
4
220-240 V3~ H05V2V2-F 4G
220-240 V2~ H05V2V2-F 3G
4 432
44
4 4
N
32
32
L2
L1
LN
1
1
1
220-240 V~ H05V2V2-F 3G
N
L3
L1
L2
380-415 V2N~ H05V2V2-F 4G
380-415 V3N~ H05V2V2-F 5G
220-240 V2N2~
H05V2V2-F 5G
43
N1
L2
21
L1
4
N2
Before making the electrical connections, check that:
- the ground cable is 2 cm longer than the other cables;
- the system ratings meet the ratings indicated on the identi cation plate xed on the lower part
of the worktop;
- the system is tted with e cient earthing compliant to the laws and regulations in force.
Earthing is obligatory by law.
If the appliance is not tted with a cable, use type:
“H05V2V2-F” for a power level of up to 6400 Watts, the cross-section of the cable should be at least
2.5 mm, or 4 mm for greater power levels.
The appliance is designed for permanent connection to the electricity supply and should therefore
be tted with an omnipolar switch which has a minimum opening of 3 mm between contacts. The
switch should be suitable for the charge indicated on the appliance data plate and must conform
to all current legislation (the yellow/green earth wire must not be interrupted by the switch).
The omnipolar switch must be easy to reach once the installation process has been completed.
USE AND MAINTENANCE
Maintenance
Remove any residues of food and drops of grease from the cooking surface using the special scraper
supplied (Fig.3).
- 6 -
Loading ...
Loading ...
Loading ...