Loading ...
Loading ...
Loading ...
Problem solving guide
48
Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Messages in the display
Problem Cause and remedy
After the hob has been
switched on appears
in the timer display for a
few seconds.
The system lock or safety lock is activated.
Deactivate the system lock or safety lock (see
“System lock / Safety lock”).
After the hob has been
switched on appears
in the timer display
briefly. The cooking
zones do not heat up.
The hob is in demonstration mode.
Touch the0 and 2 sensor controls at the same
time until flashes alternately with in the timer
display.
flashes in the timer
display and the hob
switches off automatic-
ally.
One or more of the sensor controls are covered, e.g.
by finger contact, food boiling over or an object.
Clean off any dirt and/or remove the object (see
“Safety switch-off”).
Loading ...
Loading ...
Loading ...