Loading ...
Loading ...
Loading ...
EN
21
Installation
www.bora.com
1
Fig. 5.19 Silicone sealant with surface mounting
[1] Black, heat-resistant silicone sealant
5.5.5 Establishing communications
The device components are connected using the flat-
ribbon cable supplied in the scope of delivery.
Create the connection between the cooktop and the
control knobs.
Create the connection between the cooktop and the
cooktop extractor.
Connecting the cooking zones
INFO If the PKIW1 Professional induction wok
cooktop has been installed with 2 control
knobs, it can be operated with both the left and
the right control knob.
INFO As the induction wok cooktop only has one
cooking zone, there is no need to pay attention
to the assignment of the connections when
connecting 2 control knobs (see the Operation
section).
Connection on the control knob
1
Fig. 5.20 Control knob connection at the back
[1] Control knob connection at the back
1
3
2
Fig. 5.17 Mounting brackets
[1] Mounting bracket
[2] Washer
[3] Screw
Affix the cooktop using the mounting brackets [1].
Use the screw [3] and the washer [2] to tighten the
mounting brackets with max. 10 Nm.
Check that the cooktop is positioned correctly.
Once all of the installation work is complete, seal the
devices with black, heat-resistant silicone sealant.
Installation rotated by 180°
Rotate the cooktop by 180°.
Conduct the installation as described.
INFO If the device is installed rotated by 180°, the
connections for the control knob and the
automatic extraction system are at the back.
INFO The scope of delivery includes sufficiently long
cables.
5.5.4 Sealing the cooktop
Ensure that no silicone sealant gets under the cooktop.
1
Fig. 5.18 Silicone sealant with ush installation
[1] Black, heat-resistant silicone sealant
Loading ...
Loading ...
Loading ...