Loading ...
Loading ...
Loading ...
EN
15
Device description
www.bora.com
4.4.3 Overheating protection
The device is fitted with overheating protection.The
overheating protection can be triggered if:
Cookware is heated up empty.
Oil or fat is heated on high power.
A hot cooking zone is switched on again after a power cut.
There is insufficient ventilation below the cooktop (see
Cooktop air intake).
Before the overheating damages the electronics, one of
the following measures is taken:
The power level can no longer be increased.
The power level set is reduced.
The cooktop switches off completely.
After a sufficient cooling period, the cooktop can be used
again in full.
4.4.4 Childproofing feature
Thechildproongfeaturepreventsthecooktopfrom
being switched on accidentally.
L
appears on the control knob display.
Thechildproongfeaturecanonlybeactivatedwhenall
thecookingzonesareswitchedo(seetheOperation
section).
4.3.8 Pause function
The cooking session can be temporarily interrupted (max.
10 minutes).
II
appears on the control knob display.
4.4 Safety devices
4.4.1 Residual heat display
INFO While
H
is displayed in the cooking zone
indicator (residual heat display), do not touch
the cooking zone or place any heat-sensitive
objects on top of it. Risk of burns and fire!
After switching it off, the cooking zone remains hot.
H
is displayed in the control knob display (residual heat
display). The display goes out after a sufficient cooling
time (temperature < 60 °C).
4.4.2 Safety shut-down
Each cooking zone is switched off automatically when the
cooking zone in the power level or heat retention level
exceeds the maximum operating duration. The control
knob display shows
H
(residual heat display).
Power level Switch off after hours:minutes
1
08:24
2
06:24
3
05:12
4
04:12
5
03:18
6
02:12
7
02:12
8
01:48
9
01:13
P
00:10
Tab. 4.6 Safety shut-down for power levels
Heat retention level Switch off after hours:minutes
1 (
,
)
08:00
2 (
:
)
08:00
3 (
*
)
08:00
Tab. 4.7 Safety shut-down for heat retention levels
Switch the cooking zone back on (see Operating
section) if you want to put the cooking zone back into
operation.
Loading ...
Loading ...
Loading ...