Loading ...
Loading ...
Loading ...
EN
19
Installation
www.bora.com
Installation with 1 control knob
Fig. 5.10 Installed cooktop with 1 control knob
≥70
Ø50 ±0,5
370
Fig. 5.11 Drilling diagram
[1] Cooktop
[2] Worktop
[3] Floor unit’s panel
Installing the control knob
Fig. 5.12 Installing the control knob
Pull off the selector ring.
Unscrew the fixing nut.
Push the control knob through the drilled hole in the
floor unit’s panel from the front.
Screw the fixing nut onto the control knob from the
back and lightly tighten it.
Carefully remove the plastic strip [1] from the side of
the cooktop extractor [2].
Use a Stanley knife or similar suitable tool to assist
you.
5.5.2 Installing the control knob behind the
floor unit’s panel
INFO Pre-drill the bore holes to prevent tearing out
the panel.
Installation with 2 control knobs
Fig. 5.8 Installed control knobs and cooktop
≥70
Ø50 ±0,5
370
80-140
Fig. 5.9 Drilling diagram
[1] Cooktop
[2] Worktop
[3] Floor unit’s panel
Loading ...
Loading ...
Loading ...