Loading ...
Loading ...
Loading ...
Most laundering problems are easily
solved if you understand the cause.
Using the charts below wil! save you
time and money by helping you avoid
unnecessary service calls.
Problem
Not Drying
Satisfactorily
8olution
Clean tint screen.
Run dryer for 5-10 minutes. Hold
hand under outside exhaust hood to
check air movement. If you do not feet
air moving, clean exhaust system of
tint or replace exhaust vent with heavy
metal or flexible metal vent
(see "INSTALLATION',' Section D).
Exhaust vent is crushed Replace with heavy metal or
or kinked, flexible metal vent
(see "INSTALLATION',' Section D).
One fuse is blown or circuit Replace fuse or reset breaker.
breaker is tripped. The dryer
will appear to operate, but you
will not get any heat.
Timer or the temperature Select the right cycle for the types
control is set on AIR DRY of garments being dried
orAIR FLUFF. (see "OPERATION").
Load not contacting the Level dryer
sensor strips and automatic (see "INSTALLATION',' Section B).
cycle ending early.
Fabric softener sheets Use only one softener sheet per load
blocking outlet grill, and only use it once.
Dryer located in room with Move dryer where it can operate in
temperature below 45°F. ambient air temperatures above 45°F.
Large amount of moisture Expect longer dry times with items
in the toad. that hold more moisture (cottons).
Cold rinse water used. Expect longer dry times, but you are
saving energy and reducing wrinkles.
Load too large and bulky to Separate toad to tumble freely.
dry quickly.
Dryer Will Power cord not firmly plugged Plug power cord into a live circuit.
Not Run into a live circuit with proper
voltage.
Fuses blown or circuit Replace fuses or reset breakers.
breakers tripped.
Possible Cause
Lint screen is clogged with lint.
Restricted air movement.
Exhaust vent or outside
exhaust hood is clogged with tint.
38
Loading ...
Loading ...
Loading ...