Loading ...
Loading ...
Loading ...
4 Configuration D-Link Smart Managed Switch User Manual
38
Figure 4.49 - OAM > Cable Diagnostics
Select a port and then click the Test Now button to start the diagnosis. The results will be displayed below:
Figure 4.50 - OAM > Cable Diagnostics - results
The information that can be viewed is described below:
Item Description
Test Result
The description of the cable diagnostic results.
OK means the cable is in good condition.
Short in Cable means there is an unintended connection
between two or more conductors in the Ethernet cable.
Open in Cable means the wires of RJ45 cable may be
broken or the other end
of the cable is simply
disconnected.
Test Failed means and error occurred during the cable
test. Please select the same port and test again.
Cable Fault Distance
(meters)
Indicates the distance of the cable fault from the Switch port. If
the cable is les
s than 2 meters, it will show “No Cable”,
whether the cable is connected to the port or not.
Table 4.32
Monitoring > Statistics > Port Counters
The Port Counters page displays the status of each port’s packet count.
Figure 4.51 – Monitoring > Statistics > Port Counters
Click Refresh to renew the port counters statistics table.
Click Clean All to delete all port counter statistics.
Loading ...
Loading ...
Loading ...