Loading ...
Loading ...
Loading ...
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on
the hanging bracket. Turn the hanging ball slot
until it lines up with the hanging bracket tab.
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
serious injury or death.
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
up to you once you are set on the ladder.
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. [Refer to
diagram 5.] If necessary, adjust the loop at the
end of the safety cable. The loop at the end of
the safety cable should just fit over the threads
on the wood screw. Test safety cable by pulling
on loose end with pliers. If the safety cable slips,
the loop must be adjusted tighter. Extra cable
slack can be left in ceiling area.
page 5
5. Fan Assembly (with downrod). (cont.)
diagram 5
safety cable loop
wood ceiling joist
hanging ball slot
hanging bracket tab
safety cable
wood screw
and washer
Loading ...
Loading ...
Loading ...