Loading ...
Loading ...
Loading ...
TrotJbleshooting
My <ooktop does not Check it is plugged in and there is power to tile wall socket.
The gas igniters may be dirty. These can be easily cleaned
with a toothbrush and rubbing alcohol.
The burner parts may' not be located properly'. Check the
assembly and make sure tile burner cap is sitting flat.
Check the gas supply valve is turned on and the supply to
the house is working. Gas should be heard when you turn a
burner on.
My burner flames are
The burner parts may not be located properly. Check the
assembly and make sure tile burner cap is sitting flat.
If you use bottled gas,this may indicate you ate getting near
the end of tile bottle.
Check that tile burner parts are not blocked with water.
The gas pressure may not be correct, check with your service
One of my burners has
an uneven f_ameo
My cooktop is sparking°
Check the burner parts ate assembled correctly and that the
burner cap is sitting flat on the burner.
Your cooktop thinks that the flame has gone out. This could
be caused by drafts disturbing the flame eg using a down
draft.
Check that the igniter is clean and dry.
Your power supply may not be properly grounded or, in an
older house, the correct wiring poBrity may not have been
observed.
The f_ame goes out at
_ow settings°
Gas supply pressure may be low, check with service person/
installer.
Low setting may be incorrect, check with your service person/
installer.
]4
Loading ...
Loading ...
Loading ...