Loading ...
Loading ...
Loading ...
24 RUSH™ MH10 Beam FX User Manual
2. Press the ENTER button. The fixture will run a self-test routine.
LED Temperature
To check the LED Temperature of the fixture, select LED TEMP. and press
ENTER. The display will show the temperature of the unit. Press MENU to
exit.
Fixture time
To display the fixture’s operating hours counter, select FIXTURE TIME and
press ENTER. The display will show the number of hours the fixture has been
in operation since manufacture. Press MENU to exit.
Firmware version
To display the fixture’s current firmware version, select FIRMWARE VERSION
and press ENTER. The display will show the version of firmware in the fixture.
Press MENU to exit.
Pro defaults
PRO Defaults lets you cancel any changes in fixture settings that have been
made using the control panel and return the fixture to its original factory default
settings. To restore the default settings:
1. Select PRO DEFAULTS and press ENTER. The display will blink.
2. Use the DOWN and UP buttons to select YES.
3. Press ENTER to restore the default settings (or press MENU to exit
without making any changes).
Reset
The fixture resets its motors each time you power it on, but you can also reset
the fixture motors manually from the control panel and by DMX. To carry out a
manual reset from the control panel, scroll to RESET and press ENTER to
reset the fixture, or press MENU to exit without resetting. A reset takes approx.
20 seconds. After this, the fixture returns to its state before the reset.
The fixture motors can also be reset by DMX using the Special Function
channel.
Fan mode
Fan speed can be adjusted to maximize light output or quiet operation.
1. Select FAN MODE and press ENTER.
2. Using the DOWN and UP buttons, toggle between the two modes:
Loading ...
Loading ...
Loading ...