Loading ...
Loading ...
Loading ...
10 RUSH™ MH10 Beam FX User Manual
Introduction
The RUSH™ MH 10 Beam FX is a fast, compact moving head effect fixture
with dual LED effects: a 60W long-life RGBW LED providing an intense 4.4
degree beam effect and an array of 24 smaller LEDs providing a background
ring of light with full individual pixel control and built-in animation effects. The
pan and tilt can continuously rotate 360 degrees or provide fixed 16-bit
positioning and the fixture also features smooth electronic dimming and strobe
effects. The rugged, lightweight construction makes it ideal for events, touring,
and small venues.
The fixture is supplied with this user manual, a 1.5 m (4.9 ft.) bare-ended
power cable ready for a local power plug (not included) and a mounting
bracket for attachment of a suitable, user-supplied rigging clamp.
Before using the product for the first time
1. Read ‘Safety information’ starting on page 5 before installing, operating or
servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using
the fixture. Do not attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, install a local
power plug (not supplied) to the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power
supply match the power requirements of the fixture.
5. Check the support pages on the Martin Professional website at
www.martin.com for the most recent user documentation and technical
information about the fixture. Martin® user manual revisions are identified
by the revision letter at the bottom of the inside cover.
Note that whenever AC power is applied to the fixture, it will reset all effects
and functions to their home positions. Be prepared for the fixture head to
move. A reset usually takes around 20 seconds.
Loading ...
Loading ...
Loading ...