Loading ...
Loading ...
Loading ...
RUSH™ MH10 Beam FX User Manual 23
Function delay
To reduce the risk of accidental activation, you can set a delay of up to 3
seconds before a DMX command will activate a function on the special
function settings DMX channel. To set the delay duration:
1. Select FUNCTION DELAY and press ENTER to confirm. The current delay
setting will blink in the display.
2. Use the DOWN and UP buttons to select No Delay, 1S Delay, 2S Delay or
3S Delay (default).
3. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
White balance adjustment
As LED brightness changes with age, you may want to adjust the output of the
fixture to match the color of other fixtures. You can individually adjust the
brightness of the red, green and blue emitters to produce the desired white
color. To adjust the fixture’s white balance:
1. Select WHITE BALANCE and press ENTER to confirm.
2. Use the DOWN and UP buttons to select RED, GREEN or BLUE.
3. Once the color has been selected, press ENTER.
4. Use the DOWN and UP buttons to adjust the amount of that color
(125~255) in the white balance mix.
5. Press ENTER to save your selection (or press MENU to exit without
saving any changes).
Manual test
Fixture functions can be individually controlled and tested manually. This
feature can be also used to setup a static scene without a controller. To
operate the fixture effects manually:
1. Select Manual Test and press ENTER.
2. Use the DOWN and UP buttons to select the function you want to set.
3. Once the function has been selected, press ENTER.
4. Use the DOWN and UP button to change the value (0-255).
5. Press MENU to exit.
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press the ENTER button.
Loading ...
Loading ...
Loading ...