Loading ...
Loading ...
Loading ...
Troubleshooting
PROBLEM CHECK THE FOLLOWING
Dishwasher seems to The dishwasher will run longer while heating the water. This is
run too long normal for lower incoming water temperatures. See page 12.
Dishwasher will not fill Is overflow protection float stuck in "up" position? Overflow
protection float should move up and down freely. Press down to
release. See page 18.
Water remains in
dishwasher
Wait for the cycle to finish. A small amount of water remaining
is normal.
Check the drain air gap (if installed). If it isclogged follow the
manufacturer's cleaning instructions. See page 20.
Dishes and glass not See "Food Soil Left on Dishes" section of "Solution chart"
clean on page 24.
White film on dishes See "Spotting and Filming"section of "Solution chad" on
page 25.
Steam from door This is normal when dishwasher is in drying portion of cycle.
See "Flo-Thru TM drying system" on page 13.
Detergent remains in Has the cycle completed?
covered detergent cup
Is the detergent fresh and dry without lumps?
Is overflow protection float stuck in "up" position? Overflow
protection float should move up and down freely. Press down to
release. See page 18.
Dishes are not as dry
as you expected
Is the rinse agent dispenser empty?
Using a rinse agent greatly improves drying. See page 11.
Do not use ENERGY SAVER DRY option on the next load. See
page 9.
Grinding, grating,
crunching, or buzzing
sounds
Has a hard object entered the pump? The sound should stop
when the object is ground up. If itdoes not stop after the next
cycle, call for service.
White residue appears
on front of access
panel
Istoo much detergent being used? See page 11 for recom-
mended amounts of detergent.
Some liquid detergents develop excess foam and build up on
access panel. Try a different brand to reduce foaming and
eliminate buildup.
29
Loading ...
Loading ...
Loading ...