For correct usage, read these instructions carefully.
Instruction Manual
Thank you for purchasing this product. This
product has been made to high quality standards
and is guaranteed for domestic use against
manufacturing faults for a period of 12 months
from date of purchase.
Table of Contents
1.Safety Regulations 3
2.Product Composition 5
2.1 Component Name
2.2 Technical Parameter 8
3.Product Composition 9
3.1 Considerations 9
3.2 Rapid Operations 10
3.3 Mode Selection 13
3.4 Use of Water Permeable Rag 15
3.5 Roller Brush Assembly 16
4.Maintenance 17
4.1 Dust Box and Filter 17
4.2 Water Tank Assembly 18
4.3 Rolling Brush and Side Brushes 19
4.4 Other Assembly 20
5.Light Effect and Alarm Tips 21
5.1 Light Effect 21
5.2 Alarm Tips 22
6.FAQ 23
1.Safety Regulations
When using the pr
oduct, please keep your vigilance and follow below information
.
3
1.Safety Regulations
4
2.Product Composition
2.1 Assembly Name
► Master
5
2.Product Composition
► Charging Stand Assembly
► Remote Control
2.Product Composition
► Dust Box
► Water Permeable Rag Assembly
7
2.Product Composition
2.2 Technical Parameters
Master
=
Charging Stand
=
Battery and Specications
Adapter
8
3.Product Composition
3.1 Considerations
Please refer to the following guidelines to check the cleaning area before
the turning on the unit for a more eicient clean.
0
_J
• •
\�
�-
9
0
3.Product Composition
3.2 Rapid Operation
Charging Preparation
D Connect the adapter to the charging stand
.
Place the charging stand
Connect the power supply
Install the Side Brushes
.
10
3.Product Composition
Sta to charge
.
D Turn on the Master
.
Master Charge
3.Product Composition
Sta Cleaning
D
nnnn
l!lll!l
j
OU
Stop Working
12
3.Product Composition
3.3 Mode Selection
Fixed-Point Mode
Edge Mode
Return Charging Mode
13
3.Product Composition
Time and Date Settings
D
14
3.Product Composition
3.4 Use of Water Permeable Rag
■ Add Water
STEP
01
■ Install Water Tank Assembly
STEP
03
15
■ Sticking the Water Rag
STEP
02
■ Mop
AUTO
nnnn
STEP
ouuu
04
3.Product Composition
3.5Roller Brush Assembly
Assembly Choices
Roller brush assembly
:
Scratch the oor, sweep eectively.
Set roller brush assembly
:
set the roller brush and
cover the board and then press
to lock.
>>
16
4.Maintance
4.1 Dust Box and Filter
When cleaning and maintaining the master and its accessories, turn o the master
and unplug the charging stand.
■ Remove the dust box, open the dust box cover, and clean the garbage
.
))
STEP
01
■
STEP
02
■
STEP
03
17
■
,
'
0
STEP
04
4.Maintance
4.2 Water Tank Assembly
Cleaning
o
f Water Rag
■ Remove: Aer the mopping is completed, remove the water tank assembly, and
remove the water permeable rag.
STEP
01
■ Maintenance: Rinse and dry the water rag
STEP
02
■ Cleaning the Water Reseoir
STEP
03
18
4.Maintance
4.3 Rolling Brush, Side Brushes
■ Cleaning Rolling Brush
STEP
01
■ Cleaning Side Brushes
STEP
02
19
4.Maintance
4.4 Other Assembly
■ Clean the universal wheel to
reduce hair entangled .
■ Clear down the sensor to ensure
the sensitivity of the sensor.
■ To clean the charging pole pieces, use a dry rag to clean the charging poles on
the bottom of the master or the charging stand.
20
5.Lighting Eects And Alarm Tips
5.1 Lighting Eects
Cleaner status AUTO Disolav Status
21
5 Lighting Eects And Alarm Tips
5.2Alarm Tips
Cleaner status
AUTO Dis la Status
Solution
l
If the above method does not solve the problem, please try the following:
the power switch on the side of the master and resta the machine.
22
6.FAQ
If the following problems occur during the use of the product, you can
solve it yourself by checking the queries.
01
02
03
04
05
23
06
Consumer Warranty
.
Warranty Period
Registering Your Purchase
Procedure for claiming under warranty
@
Please retain your original receipt as proof of purchase
