GE - General Electric DVL223EY0AA GE electric dryer

User Manual - Page 20

For DVL223EY0AA.

PDF File Manual, 24 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Beforeyoucall forservice...
Troubleshooting tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem Possible Causes What ToDo
Drier doesn'tstatt Dryer is unplugged * Make sure the chyer plug is pushed completely into
the outlet.
Fuse is blown/circuit breaker * Check the household Disu'ibution Panel iilse/circuit
is tripped breaker box in your home, and replace fuse or reset
breaker. NOTE:Most elecu'ic dryers require your home
to use 2 fuses or a breaker.
Thermal limiter tripped * Call authorized service person for replacement.
Drier doesn't heat Fuse is blown/circuit breaker * Check the fuse/circuit breaker box in yore" home, and
is tripped, the dryer may replace iilse or reset breaker.
tumble but not heat
Gas service is off * Make sure gas shutoffat &yer and main shutoffare
fiflly open.
There are 2 fuses in the Replace ihse.
household Distribution Panel
for the dryer circuit. If 1 of the
2 fuses in the household
Distribution Panel is blown,
the drum may turn but the heat
will not operate
Gas supply valve is not open * Check to make sure supply valve is open.
(gas models) See InstallationInstructionsibr procedure.
Dryer does not have enough air See Installation Instructions
supply to support the burner
flame (gas models)
LP gas supply tank is empty * Refill or replace tank. D_yer should heat when utility
or there has been a utility service is restored.
interruption of natural gas
(gas models)
Drier shakes or Some shaking/noise is normal. * Move &yer to an even floor space, or adjust leveling legs
makes noise Dryer may be sitting unevenly as necessmy until even.
Greasy spots on clothes Improper use of labile softener * Follow directions on fabric softener package.
Drying dirty items with Use your duer to dU only clean items. Dirty"items can
clean ones stain clean items and the duet.
Clothes were not * Sometimes stains which cannot be seen when the clothes
completely clean are wet appear after duing. Use proper washing
procedures before drying.
Lintonclothes Lint filter is full Clean lint screen before each load.
Improper sorting * Sort lint producers (like chenille) from lint collectors
(like corduroy).
Static electricity can attract lint See suggestions in this section under STATIC.
Overloading Sepatvtte large loads into smaller ones.
Paper, tissue, etc. left in pockets * Empty all pockets before laundering clothes.
2O
Loading ...
Loading ...
Loading ...