Loading ...
Loading ...
Loading ...
FUNCTION OPERATING PART/
ERROR CODE AND POSSIBLE CAUSE
11
www.cuckooworld.com
ENGLISH
FUNCTION OPERATING PART
< stand-by mode >
WARM/REHEAT
Button
Used to warm or reheat
PRESET Button
Used to preset Preferred
cooking time
AUTO CLEAN/
LOCK Button
When you use automatic
steam cleaning function
used to button-lock function
MENU/SELECTION
Button
> : Right selection button
< : Left selection button
This function is used to select
menu or change the time.
Used when changing the
function selected by setting
button.
SET/OPEN
COOKING Button
When you use automatic
steam cleaning function or
OPEN COOKING function
NON PRESSURE
COOK Button
Used to start non pressure
cooking
CANCEL Button
This function is used to cancel
a selection or release remaining
steam in the inner pot
When using Power Saving
Function
HIGH PRESSURE
COOK Button
Used to start high pressure
Cooking
Display
HIGH HEAT Button
This function is used for to activate
the High heat cooking mode of the
cooking functions such as White
Rice, Multi Grain Rice
DIRECT TOUCH
This function is used when cooking
Sticky White Rice, Sticky Multi
Grain Rice, SCORCHED RICE,
Veggie Rice
When the product has any problems or used it inappropriately, you can follow the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service.
Error Code and Possible Cause
When the inner pot is not placed into the unit.
※ When you see an image like one in the right side on your display, it means the rice
cooker is in ‘stand-by’ mode.
※ Press ‘Cancel’ button to enter the ‘Waiting’ mode.
※ Press the button until you hear the buzzer sound. The image of the plate may different.
This error code is displayed when either High Pressure Cooking, Non Pressure Cooking, Keep Warm/Reheat, Reservation, or Auto
Clean button is selected while the Lock/Unlock handle is not firmly adjusted to “High Pressure” or “Non Pressure”. Firmly turn the
Lock/Unlock handle to either “High Pressure” or “Non Pressure” as applicable.
This error code is shown when power is disconnected for 10 minutes
while cooking.
Press “Cancel” button to reset to Stand-by mode.
When setting preset time longer than 13
hours Set the preset time within 13 hours.
It is appears on the display when you press ‘PRESSURE COOK’ or ‘PRESET/AUTO CLEAN’ button again, or if the cooking
has finished and you've never ever turned the handle to “ NON PRESSURE” , It can be solved by turning handle to “ NON
PRESSURE” and then turn to “HIGH PRESSURE ”.
Problem on micom power.
Problem on environment sensor.
Problem on micom memory.
This error message shows up when ‘PRESSURE COOK’ or ‘KEEP WARM/REHEAT’ button is pressed while separate cover is
not mounted. Mount separete cover. While keeping warm. alarm will sound and keeping warm and reheating do not work.
This code indicates the function of checking
for abnormality of power of product.
This error code is displayed when
the smart locking system has failed.
This error code is displayed when the smart locking system has failed. Please
do not open the lid until cooking is completely finished. If error occurs during
warming or stand by mode, please open the lid after turn off the power. Please
contact Service center for service inquiry.
Problem on temperature sensor. (“E_ _” mark, “E_ P” mark, “E_t” mark blink.)
Problem on fan motor.
(“ ” mark blink.)
Loading ...
Loading ...
Loading ...