Loading ...
Loading ...
Loading ...
STEP5: (SEEFIGURE19)
• AttachtheL.H.framesupporttothetractor.Installa
3/8"x1"hexbolt,abushingandanylocknutinthe
rearholeofthesupport.Installa5/16"x3/4"thread
formingboltandabushinginthefourthholeofthe
support.Installthree5/16"x1"hexboltand5/16"
nylocknutsinthefrontthreeholesofthesupport.
Tightenafterallboltsareinstalled.Repeatthisstep
usingtheR.H.framesupport.
STEP7: (SEEFIGURE21)
AttachtheR.H.andL.H.rearframebracketstothe
insideoftheclutch/idlerassembly.Useone5/16"x
3/4"hexboltand5/16"nylocknutinthefronthole
ofeachbracketandthethirdholeintheclutch/idler
assembly.Donottightenyet.
AssembletheR.H.andL.H.frontframebracketsto
theinsideoftheclutch/idlerassemblyusingtwo
5/16"x 3/4"hexboltsand5/16"nylocknutsforeach
bracket.
FIGURE19
•: 318"NYLOCK
NUT
318"x 1"
HEX BOLT
!
x 314"
THREAD
FORMING BOLT
(3) 5/16" x 1" HEXBOLTS
(3) 5/16" NYLOCK NUTS
/ l JY///
5116"x 314"
HEX BOLT
5116" x 314"
HEX BOLT
FRONT HOLE THIRD HOLE
FIGURE 21
5116"
NYLOCK
NUT
STEP 6: (SEE FIGURE 20)
Assemble the cable bracket to the outside half of the
double holes in the bottom of the clutch/idler assembly
using two 5/16" x 3/4" carriage bolts and 5/16" nylock
nuts.
5116" x 314"
CARRIAGE BOLT
CABLE
)x '''_ BRACKET
5116,,N LOOK---
NUT
FIGURE 20
STEP 8: (SEE FIGURE 22)
Assemble the two support tubes to the inside of each
front frame bracket using a 1/2" x 1-1/2" hex bolt, three
1/2" x 1" washers (from kit) and a 1/2" nylock nut for
each tube. Do not tighten yet.
1/2" NYLOCK NUT
/
@.
1/2"x 1" WASHERS (3)
(from kit)
SUPPORTTUBE
/
112"x 1-112"
HEX BOLT
FIGURE 22
9
Loading ...
Loading ...
Loading ...