Loading ...
Loading ...
Loading ...
14
EN
www.napoleongrills.com
N415-0543 DEC 12.18
Burner: The burner is made from heavy wall 304 stainless steel, but extreme heat and a corrosive
environment can cause surface corrosion to occur. This can be removed with a brass wire brush.
CAUTION! Beware of Spiders.
to clean the inside of the burner. Shake any loose debris from the burner through the gas inlet. Check the
corrosion, use an opened paperclip or the supplied port maintenance bit to clean them. Drill out blocked
ports using this drill bit in a small cordless drill. The ports are easier to clean if the burner is removed from
Reinstallaon: Reverse the procedure to reinstall the burner. Check that the valve enters the burner when
WARNING! Regulator Hose (when applicable): Check for abrasions’, melng, cuts, and cracks in the
hose. If any of these condions exist, do not use the gas grill. Have the part replaced by your Napoleon
Gas Grill dealer or qualied gas installer.
Aluminum Casngs
WARNING! Always wear protecve gloves when changing the halogen bulb in the internal lights
of your grill.
Lights
from the socket and replace with the new bulb. Reinstall the lens, by snapping it back into the housing
!
!
WARNING! When reinstalling the burner aer cleaning it is very
important that the valve/orice enters the burner tube before lighng your
gas grill. If the valve is not inside the burner tube a re or explosion could
occur.
!
2
1
3
N415-0543 DEC 12.18.indd 14 12/13/2018 10:19:17 AM
Loading ...
Loading ...
Loading ...