Loading ...
Loading ...
Loading ...
12
2.
Hardware Used
AA
Blade Screw x 9
Fiber Blade Washer x 9
BB
DANGER: To reduce the risk of serious bodily
injury, DO NOT use power tools to assemble the
blades (O). If screws are overtightened, blades (O)
may crack and break.
Insert the blade (O) through the slot on the band of
the motor assembly (I). Align holes in blade (O) with
holes in plate on underside of motor. Attach the
blade (O) with blade screws (AA) and fiber blade
washers (BB). Then, tighten each blade screw (AA),
starting with the one in the middle. Repeat for
remaining blades (O).
4.
3.
3
2
J
BB
AA
I
FINAL INSTALLATION
Remove one fitter plate screw (L) from underside
of fitter plate (K) and partially loosen the other two
fitter plate screws (L).
3
Motor
Plate
Molex
Connections
I
K
I
O
I
K
4
Molex
Connections
L
L
I
J
Remove one motor plate screw (J) from motor
plate on underside of motor assembly (I) and
partially loosen the other two motor plate
screws (J). Align slotted holes in fitter plate (K)
with loosened motor plate screws, allowing
molex connections from motor housing (I) to
come through hole in fitter plate (K). Twist fitter
plate (K) to lock. Re-insert the motor plate
screw (J) that was removed and securely
tighten all three motor plate screws (J).
Loading ...
Loading ...
Loading ...