Loading ...
Loading ...
Loading ...
Wireless Controller - Instruction Manual
21
COMMISSIONING
This appliance must only be installed by an authorised person.
WINTER OPERATION
- Open the gas tap.
- Operate the master switch of the power mains or connect the power plug to the appliance.
- Press the On/Off key to start the appliance.
- Press the Wireless start key on the control on board the machine.
- Start the Wireless and perform the identification/start operations. Choose the required operating
mode.
If the room temperature is below the set value, the appliance starts the ignition procedure (yellow
LED flashes fast). After a short time, the electronic
control system will complete burner ignition (yel-
low LED on at MAX power and flashing slowly at
MIN power).
After about two minutes, the convection fan starts.
Once the set temperature has been reached “on the
thermostat” or in case of stop for “time program-
ming”; the burner will switch off (yellow LED off)
and the appliance will remain in standby until the
next heat request.
If the “GAS AUTO*” (Hidden Menu) heating fun-
ction is selected:
* Flame on at MAX, on the Display unit, an icon
appears with 2 notches + 2 flames.
* Flame on at MIN, on the Display unit, an icon
appears with 2 notches + 1 flame.
* Flame Off, on the Display unit, an icon appears
with just 2 notches.
22
ON
Loading ...
Loading ...
Loading ...