Loading ...
Loading ...
Loading ...
EN
28
Operation
www.bora.com
Twist the knob ring to the 12 o’clock position.
A beep sounds and the cooking zone is deactivated.
The cooktop is switched off when there are no longer
any active cooking zones.
Pay attention to the residual heat display (see the
Device Description section).
Activating the short-time timer (egg timer)
Once you have confirmed the time set, you have
3 seconds to turn the knob ring to the 12 o’clock
position.
This activates the short-time timer and the time starts
to count down.
The displays shows remaining time (accurate to the
minute for more than 2 minutes and accurate to the
second for under 2 minutes).
At the end of the time, a beep sounds for 2 minutes
and the control knob display flashes
0
0
0
.
The flashing and the beeping can be stopped by
pressing the touch surface.
Switching off the short-time timer (egg timer) early:
Press the touch surface of the knob ring.
The short-time timer is deactivated.
The control knob display shows
0
and a beep sounds.
6.2.9 Pause function
Activate pause function
Press the touch surface of the control knob for
1 second.
A signal tone is heard and
1
1
is displayed.
The cooking session is interrupted.
INFO The cooking session can be paused for a
maximum of 10 minutes. If the pause function is
not deactivated in this time, the relevant cooking
zone is switched off.
Deactivate pause function
Press the touch surface of the control knob for
1 second.
A signal tone is heard and the previously set power
level is displayed.
The cooking session continues.
6.2.10 Switching off the cooking zone
INFO When
H
is displayed, the cooking zone
is still hot.
INFO Turn the cooking zone off after use.
Do not rely on the pan size recognition.
Fig. 6.4 Switching o the cooking zone
Loading ...
Loading ...
Loading ...