Loading ...
Loading ...
Loading ...
8 9
INSTALLATIONINSTALLATION
INSTALLING YOUR OVEN ACCESSORIES INSTALLING YOUR OVEN ACCESSORIES
ensure the left pegs go into the upper two access holes.
1. Catalytic liners (on selected models)
Catalytic liners are coated with a specially formulated enamel
must be installed first but you can omit them, if you wish,
with no effect to cooking performance. Their sole purpose
is to make oven cleaning easier.
oven. There will be a left hand and right hand version.
This is marked on the panel.
shiny side of the liner should be facing the oven wall,
to the top rear portion of the oven. The right hand side
will be a mirror image of this.
wall, push them in and then allow the liner to slide
down to its final position.
2. Side racks
holes provided, ensuring pegs are fully inserted.
and push in firmly.
3. Shelves and trays (excluding POR881)
The shelves are designed so that they have maximum travel
but cannot be accidentally pulled right out. The trays are
designed the same way and fit straight into the side racks.
the same rail positions on both sides of the oven are
being engaged.
into the oven.
side rack, the shelf can be pushed completely in.
with the closed oven door.
product, fully open the drawer and position the tray
so that the slots on the outer edges fit over the tabs
on the slides.
Shelves and trays (POR881 only)
The shelves are designed to travel freely on runners without
being pulled out accidentally. Make sure you have the shelf
in the correct orientation before you slide it in. Otherwise it
could become jammed.
Note: The Top ‘Ledge’ is not a shelf position
the oven. Lower the front edge as you push the shelf
completely in.
into a wire carrier that fits into the oven exactly like
the shelves.
slides into the wire runners in a similar manner.
with the closed oven door.
Loading ...
Loading ...
Loading ...