Loading ...
Loading ...
Loading ...
34 35
CLEANINGCLEANING
Your pyrolytic oven is equipped with an oven door that can
be disassembled in order to clean all the panes of glass.
Positioning the door for dismantling
The door needs to be positioned at an angle to aid in the
disassembly of the panes.
on each hinge to the open position.
tabs. The door is now ready for dismantling.
Removing the top door trim
CLEANING YOUR APPLIANCE CLEANING THE PYROLYTIC OVEN DOOR
(POR883 & POR881 MODELS ONLY)
Replacing top door trim
position it to the inside edge of the glass.
until the clip snaps in on each side of
the trim.
Removing the glass panes
are removed before cleaning. Do not misplace them!
Cleaning the glass panes
Clean with a damp cloth.
as these could damage the reflective surface.
Replacing the glass panes
this pane. This coating is indicated by a circle printed
pictured below.
Circle in this corner
inwards towards the oven.
Replacing the top door trim
Open the oven door fully and return the locating tab on
each hinge to the original closed position.
Loading ...
Loading ...
Loading ...