Loading ...
Loading ...
Loading ...
36 37
SOLVING PROBLEMSCLEANING
SOLVING PROBLEMS
Faults
If there is a problem with the oven and/or grill, please:
It may be possible to avoid a call by fixing the problem
NOTE: We may charge for service even in the guarantee
period if your problem is due to the causes listed below.
Data Plate
When you need information, service or replacement parts please:
visible when the oven or grill door is open.
If you need more information, please contact the Customer
If you have a warranty or spare parts enquiry, you should
call the number listed on the back page.
PROBLEM POSSIBLE CAUSE
Oven or grill
not working:
power supply is off.
(Refer to operating instructions).
NOTE: If the household fuse continues
to blow, call the Customer Care Centre.
Oven light
not working:
NOTE: If the household fuse continues
to blow, call the Customer Care Centre.
Oven not
heating enough:
Oven not working:
timer operating instructions)
NOTE: If the household fuse continues
to blow, call the Customer Care Centre.
Timer flashing
on display:
NOTE: Reset time of day and any cooking
functions you were using. (Refer to TIMER
operating instructions).
first used:
Condensation
building up:
(Some condensation is normal)
replaced after removal
Pyrolytic cycle not
working
the oven
NOTE: Only authorised personnel should carry out servicing.
PYROLYTIC CLEANING OF THE OVEN CAVITY
(POR883 & POR881 MODELS ONLY)
Operation
burning off the spatters and accumulated dirt and grease
from the oven cavity, at high temperature. This process
produces ash which can then be wiped out of the oven cavity.
CAUTION
must be kept clear of any obstruction (eg tea towels).
keep the oven in its best condition.
(eg cookware).
Before carrying out the Pyro function,
shelves, trays and side racks. Clean large pieces of dirt or
grease from the oven cavity.
Pyrolytic Cleaning Operation (POR883 only)
SOILING DURATION
Light clean
This is an energy saving cycle that can be used on a
regular basis if your oven is lightly soiled. Possibly after
Starting the Pyro clean function
for the appropriate level of cleaning.
Pyrolytic Cleaning Operation (POR881 only)
1. The pyrolytic cleaning function can be selected by
turning the function selector switch clockwise to the
clock to toggle between a pyrolytic cleaning time of
be stopped at any time by turning the function selector
counterclockwise to the OFF position.
TIPS & INFORMATION
symbol will appear on the display.) The door will only
unlock when the oven has cooled to a safe temperature.
Turning the function off will not unlock the door. This will
only happen when safe temperatures are reached.
Note: The cooling fan will operate at an increased speed
for Pyro cleaning and will continue to run until the oven has
cooled down. This is normal.
After Pyro cleaning
with a soft damp cloth and warm water.
To restore the enamel shine to more difficult areas,
use a damp cloth with white vinegar and detergent.
Loading ...
Loading ...
Loading ...