Loading ...
Loading ...
Loading ...
19
OVERLAY DOOR PANEL INSTALLATION
!
CAUTION
Weight of overlay door panel must not exceed 15
pounds (6.8 kg).
Loosen (do not remove ) these
2 phillips head screws on the
top and bottom hinges
Figure 30a
Cabinet
"Z" Bracket
Figure 30
"P" clamp
and screw
Wire connector
see Figure 31
Bottom of
door
Press and hold down this
tab on the wire connector
and pull the connector apart.
Step 2: Remove the door gasket
With the door laying on a at surface and starting at a cor-
ner of the door remove the magnetic door gasket from it's
retainer by pulling it away from the interior side of the door,
see Figure 32. Set the gasket aside on a at surface.
There are 10 holes in the gasket retainer extrusions, (3 on
each side and 2 at the top and bottom which are used to
fasten the panel to the front of the door. The screws are
provided in the literature pack.
Figure 31
Overlay panel to
be centered on
width of door.
Overlay panel
ush with top
of door.
Magnetic Gasket
remove starting at a
corner, grasp and pull
away from the door.
Holes in
gasket
retainer.
Figure 32a
Step 3: Cut and drill the overlay panel
Depending on your model cut the overlay door panel to the
dimensions shown in Figure 33 to Figure 36.
Figure 30b
Figure 32
Loading ...
Loading ...
Loading ...