Marvel MP15CPP2RP Professional Series 15 Inch Panel Ready Freestanding and Built-In Ice Maker

User Manual - Page 15

For MP15CPP2RP.

PDF File Manual, 90 pages, Read Online | Download pdf file

MP15CPP2RP photo
Loading ...
Loading ...
Loading ...
15
Error codes:
The ice machine is monitored continuously. Any OPEN or
SHORTED circuit condition with a temperature sensor or
miscommunications between the control and user interface
will initiate an ERROR CODE as listed below:
Error Codes
Error Displayed Code Error Description Action to Take
Bin Sensor error
"OFF" will ash continuously in 1
second intervals in the display. No
audible alarm will sound.
Failed temperature sensor. Machine operation will imme-
diately enter an OFF state.
Call service to have the
temperature sensor replaced.
System Sensor error
"ICE" will ash continuously in
the display. No audible alarm will
sound.
Failed condenser temperature sensor. Machine opera-
tion will continue but ice production cycle will not adapt to
varying ambient conditions, so ice quality may vary.
Call service to have the
temperature sensor replaced.
Communication error
Continual ashing of all indicators
on the display.
Loss of communication between the main board and the
user interface.
Call service to have a
diagnostic check.
ICE
Options menu:
Normal and ECO mode:
Your ice machine comes with an optional "ECO" mode.
This new feature allows you to tailor ice production to a
conservative rate, saving approximately 25% energy and
water from routine operation. While in this mode
ice production will slow and the appliance will use
less water and electricity. It is recommended that
"ECO" mode only be initiated after there is a full bin
of ice. To enter "ECO" mode do the following:
Press the "MENU" icon twice and the green
"ECO" will ash.
Press and hold the "ON/OFF" icon until the green
"ECO" stops ashing and remains illuminated.
To return to the standard operating rate press
the "MENU" icon twice, the ECO will turn off
and the "ICE" will be ashing. Press and hold
the "ON/OFF" icon until the "ICE" stops ashing and
remains illuminated.
ECO
USING YOUR ELECTRONIC CONTROL
To enter the delay start mode, press the "CLOCK"
icon while the appliance is in "ICE" mode. This will
delay the next harvest by the time displayed. Each
additional press of the "CLOCK" icon will add time,
from 1, 4, 6, or 8 hours, to 1, 4, 6, or 8
days. The next press after 8 days will
leave delay set mode. After the desired
time has been selected, press the "ON/OFF" icon
for 2 seconds to accept, your unit will shut off and a
clock icon and your selected time will be displayed.
When the selected time has elapsed, normal ice pro-
duction will resume.
To cancel the delayed start, press and
hold the "ON/OFF" icon until the appli-
ance enters OFF, then press and hold
the "ON/OFF" icon again until the appli-
ance enters "ICE" mode.
1 4 6 8
hours
days
ICE
OFF
Door ajar alarm:
If the door is open, or not closed properly for
5 minutes the "DOOR" indicator will illuminate
and ash and an audible tone will sound. This
alarm condition can be reset by closing the door or
momentarily pressing the "ON/OFF" icon, (i.e.-if you
are cleaning the storage compartment, etc.). The
alarm will recur in 5 minutes if the alarm condition persists.
If the door is intentionally left open for long periods, the
alarm can be disabled by turning the unit off.
DOOR
Delay start/Vacation mode:
Your ice machine is equipped with a delay start function.
This feature can be used to temporarily shut the appliance
off for 1, 4, 6, or 8 hours or days. Upon completion of the
selected delay period, the appliance will resume operation.
This is ideal for temporarily stopping ice machine noises or
to save water and electricity if you are away from home but
want fresh ice upon your return.
Loading ...
Loading ...
Loading ...