Loading ...
Loading ...
Loading ...
www.GEAppliances.com
Sanitizing the Reverse Osmosis System
Sanitize upon installadon of the Reverse OsIllosis
systeln and after ser_4cing inner parts, including
replacement of prefilter, posttiher and the
IneInbrane cartridge.
Be sure to wash your bands before handling
inner parts of the syslem.
A CAUTION:_ef_,re smlidzing, be sure to
remove all carlridges. (iblorine will destruy tile
Reverse Osmosis Inembrane carlridge.
I. Follow steps 1 through 4 under Prefiltor,
Posffilter and Reverse Osmosis Membrane Cartridge
Replacement Procedure.
2 Fill file eInpty caIfister labeled "Sanifizalion
C_mister" wifll waler lx_within 1 inch of die
tipper opening. Add 1 oz. (2 Tbsp.) ordinary
household bleach. Install canister into tile
prefilter canister position by turning m the right
aixmt 1/3 mm until die _ligmment Inark_; line
up and die canister stops.
"_-.,..,...,_ Prefilter
position
3. Install die two additional "sanifiziafion cmfislers"
inlo die meInbrane canister and postflher
openings in die manifold by turlling to lbe right
aixmt 1/3 mm until die aligmment marks line
up and die canismr stops.
4. Turn ON waler supply. Turn ON fimcet until
W_alerbegins lo flow from 1tie faucet, then Illrn
tZaucel OFE Allow system m fill for 10 minutes.
5. TurIl fhucet ON and allow water m flow fbr 20
minutes, or until bleach udor is gune. "Ibm OFF
waler supply again. "I_m ON faucet m drain
tile sys/eIn.
6. Once die system is drained, mm tile fhucet OFF
and remove tile canisters by mining m die left
about 1/3 turn. Keep the_ in a safe place undl
needed tile next time.
Sanitization
canisters 79
Loading ...
Loading ...
Loading ...