Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/26180467-pnrq20fbb00/bgc.png)
Installation Instructions
FEED WATER SUPPLY (cont,)
INSTALLING THE TUBING TO TANK
AND FAUCET
1.
Measure 3/4" from the end of each
remaining piece of tubing (faucet end and
inlet end) and mark with a pencil. (Check
for roundness, smoothness, cuts, nicks,
flat spots and sharp edges).
INCORRECT
.
.
Push the tubing firmly into each fitting on
the manifold until the line is flush with the
fitting collar. (If the tubing is removed, re-
cut the end, measure, mark and re-insert).
Tubing must be fully inserted to avoid
leaks. To remove tubing: depress and hold
white collet; pull tubing out to remove.
White Collet _///////_/
(DO NOT REMOVE) __/
Insertion I_
Insert tubing _
_(3ngagemen--_
3/4" -I
/8" tubing) i
Pull out slightly on tubing to ensure a
good seal.
12
Loading ...
Loading ...
Loading ...