Loading ...
Loading ...
Loading ...
Use
101
EN
3.10 Programmer clock
Value decrease button
Clock button
Value increase button
Setting the time
On the first use, or after a power failure, the
digits will be flashing on the
appliance’s display.
1. Hold down the clock button for two
seconds. The dot between the hours and
the minutes flashes.
2. The time can be set via the value
increase button and value
decrease button. Keep the button
pressed in to increase or decrease
rapidly.
3. Wait 7 seconds. The dot between the
hours and the minutes stops flashing.
4. The symbol on the display indicates
that the appliance is ready to start
cooking.
Ensure that the programmer clock
shows the cooking duration
symbol , otherwise it will not
be possible to turn on the oven.
Press the button to reset the
programmer clock.
When using the appliance for the
first time or after a power failure,
setting the time on one clock will
set the same time on the other.
If the time is not set, the oven will
not switch on.
Use the same clock that you used
for the first time setting.
To change the time, hold down the
value increase button and
value decrease button at the
same time for two seconds, then
set the time.
Loading ...
Loading ...
Loading ...