Loading ...
Loading ...
Loading ...
-2SCREWS
r\
I
I
BLOWERBOX
_2SCREWS
CORNER
BRACKET
2SCREWS
COILBOX
Fig. 4--Removal of Brackets on Modular Units
COIL MOUNTING
- SCREW
Ag5293
-SECONDARYDRAEN
Fig. 5--Conversion for Horizontal Right Applications Using a Slope Coil
3. Remove coil assembly
4. L;ly _llt coil unit o11 its right side and reinstall coit assembly with condensate pan down (See Fig 5.)
5. Attach COil to casing flange using coil mounting screw previously removed
6. Make sine tile pan cap in the fitting door is properly seated on the fitting door to retain the low air leak rating of the unit.
7. Add gaskeI_ from kit KFAHD per kit instructions
8. Align holes with tubing connections and condensate pan connections, and reinstall access panels and filling panel
Make sure liquid and suction tube grommets are in place Io prevent air leaks and cabinet sweating. Install after br_aTing
HORIZONTAL RIGHT CONVERSION OF UNITS WITH A-COIL
1+ Remove blower and coil access panels. (See Fig 6)
2. Remove metal clip securing fitting panel to condensale pan Remove fitting panel
3. Remove 2 snap-in clips securing A-coil in unit
A03001
Loading ...
Loading ...
Loading ...