Loading ...
Loading ...
Loading ...
Initial commissioning
26
Prompts will then appear in the display.
After confirming these prompts with
OK, the messages Refill salt and
Add rinse aid may appear.
Add salt and rinse aid if necessary
(see “Reactivation salt” and “Rinse
aid” under “Before using for the first
time”).
Select OK to confirm the messages.
The program selected will appear briefly
in the display and the appropriate sen-
sor button will be illuminated.
Next, the estimated energy and water
consumption may be shown for the se-
lected program for several seconds.
The display will then show the esti-
mated program duration for the pro-
gram selected.
Reactivation salt
In order to achieve good cleaning re-
sults, the dishwasher needs to operate
with soft water. Hard water results in
the build-up of calcium deposits on
dishes and on the inner surfaces of the
machine.
Tap water with a water hardness level
higher than 5.2gr/gal (5°dH – German
scale) must be softened. This occurs
automatically in the integrated water
softener. The water softener is suitable
for a water hardness level of up to 38°F
(36°dH).
In order to maintain the functions of the
water softener, it must be reactivated
regularly. Reactivation occurs automati-
cally every ninth program sequence. At
the start of the next program, an addi-
tional 4.4l of water is required for this
process. Energy consumption increases
by 0.015kWh and the program is ex-
tended by 3minutes.
The above only applies to the Economy
program at a water hardness of 14°dH.
For other programs and water hardness
levels, the frequency of reactivation will
differ.
In order to be reactivated, the water
softener requires reactivation salt.
Depending on the water hardness level
(<22gr/gal, or <21°dH – German
scale), reactivation salt is not required if
combination detergents are being used
(see “Active ingredients” under “Deter-
gents”).
Loading ...
Loading ...
Loading ...