Loading ...
Loading ...
Loading ...
4
3. BEFORE YOU INSTALL YOUR TANKLESS WATER HEATER
By installing this product you acknowledge the terms of manufacturer's warranty and your authorized dealers
return policy. Water heaters that have been installed cannot be returned. If you have any questions regarding
the warranty or product return policies please consult your authorized dealer.
Please open your tankless water heater box and carefully unpacked it, and inspect all components.
4. SELECTING INSTALLATION LOCATION
Your tankless water heater is a compact design and it has to be wall mounted, however improper installation,
maintenance or service adjustments may cause property damage. This appliance is designed to be installed
vertically and indoors only. You may be able to install your appliance in outdoor location provided that it is
mounted in a suitable enclosure that protects it from rain and water splashing, direct sun light, debris, and
insects. This product should NOT be installed in locations where it may be subject to freezing temperatures. If
the water inside your tankless water heater unit freezes, it can cause severe and permanent damage that is not
covered under your warranty. If you suspect your Maxwell tankless water heater has frozen, do not turn on
your unit until it has completely thawed out, and you have inspected the unit for leaks.
It is recommended and you should give consideration to your existing plumbing configuration and location of
your main electrical panel, and future servicing. DO NOT locate the unit in a location that will be difficult to
access. Most of the times, it is better and easier to install your new appliance at the same location as your old
one.
Combustible materials should be kept at least 24 inches or 60 cm. from your unit and the output hot water pipe.
Your unit does not require any type of venting. You should avoid installing your unit in places subject to
excessive humidity, moisture or dust, and even splashing water or other liquids, like under water pipes, water
gutters, air conditioning drain or refrigerant lines that might leak or condense moisture that could drip onto the
unit. DO NOT install your unit above electrical boxes or junction boxes.
5. MOUNTING YOUR ELECTRIC TANKLESS WATER HEATER
Your appliance should be mounted on a solid and secure surface. Prior to installation ensure that the unit is
leveled before tightening the screws. We recommend that for ease of installation and service product should be
installed in upright position with the inlet and outlet water connections at the bottom of the unit.
Recommended clearances: Above and below unit 12” and front panel 6”.
CAUTION: Clearances to combustible materials should be at a minimum of 24” away from the unit, and the
water inlet and outlet connections.
Loading ...
Loading ...
Loading ...