Simpson SVEP614SA Electric Multifunction 7 Single EasyPyro oven

User Manual - Page 33

For SVEP614SA. Also, The document are for others Simpson models: CVE602*, CVE612*, CVE614*, SVE614*, CVE624*, SVE624*, CVE662*, CVEP604*, CVEP614*, SVEP614*

PDF File Manual, 40 pages, Read Online | Download pdf file

SVEP614SA photo
Loading ...
Loading ...
Loading ...
Cleaning the door glass panels
caution
Do not to use harsh abrasives on the glass panes as the
reflective surface plays a role in the function of the oven.
Do not place glass in dishwasher. Hand wash only with
a soft cloth and warm soapy water. When dry polish with
a soft cloth and ensure the glass is dry before reassembly.
Re-assembling the 4 layer oven door
Re-assembling the door glass panels
Assemble the rubber spacers to the upper corners of one
of the clear glass panels. Position the panel into the lower
position of the door, ensuring the chamfered corner of the
panel is placed in the correct location as shown in the
next diagram.
Chamfer to be located in this corner
Rubber spacers
Insert the remaining smaller clear glass panel into the
middle position, ensuring the chamfered corner of the
panel is placed in the correct location as shown in
the diagram below.
Chamfer to be located in this corner
Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the diagram below..
Replacing the top door trim
Hold the top door trim at each side and position it to the
inside edge of the glass.
Push the trim down with its top edge over the glass panel
until the clip snap in on each side of the trim.
Push the middle of the trim down to ensure it is straight
and firm against the glass panel.
cleaning your oven door
(pyrolytic models)
32 CLEANING YOUR OVEN DOOR (PYROLYTIC MODELS) Built-in Cooking Built-in Cooking CLEANING YOUR OVEN DOOR (PYROLYTIC MODELS) 33
cleaning your oven door
(pyrolytic models)
Fitting the oven door
Take hold of the oven door with a hand on each side and
with the door at an angle of 30˚, position the recesses at
the bottom of the door onto the hinge arms of the oven.
Let the door slide down the hinge arms as far as it will go.
Open the door fully to access the hinges.
Rotate the ‘stirrups’ (see the image below) until
they lock into the hook. The oven door may now
be closed.
stirrup in locked
position
door
column
Loading ...
Loading ...
Loading ...