Loading ...
Loading ...
Loading ...
5 button programmable clock (cont)
Setting the oven function
1. Turn the oven FUNCTION selector clockwise to select
the desired oven function. The default temperature for
that function will be shown on the display.
2. After 5 seconds from the last change, the oven will
begin heating and the “Elapsed time” commences on
the display.
Changing the oven temperature
1. Toggle the TEMPERATURE selector left
or right
as required to set the desired cooking temperature.
The temperature setting changes in increments of 5°C.
2. The set temperature is displayed for 5 seconds from
the last change.
NOTE: The temperature can be adjusted at any time.
Oven temperature cannot be changed for the Defrost or
Pyro function.
Setting the cooking duration
1. Select the desired oven function and cooking temperature.
2. Press “Clock” button until the COOK TIME symbol
appears flashing.
3. Set the desired cooking duration “Minutes” by using
or
buttons while the COOK TIME symbol is flashing.
4. Press the CLOCK button and the cooking duration “Hours”
will flash and can be set in the same manner.
5. After 5 seconds from the last change, the COOK TIME
symbol
will stop flashing confirming the cooking
duration is set.
6. A countdown of the “Cooking time remaining” will be
shown on the display.
7. When the set time has elapsed, a signal will sound and
the oven will turn off. To stop the signal, press any button
on the clock and then turn the oven FUNCTION selector
to “Off”.
NOTE: Do not forget to add pre-heating time if necessary.
Cooking duration cannot be set for the Rapid Heat function.
The cooking duration can be cancelled at any time by turning
the “Function” selector to “Off”.
Checking the oven temperature
To check the actual temperature inside the oven, press any
button on the controller to display the temperature.
Setting the cooking end time
1. Select the desired oven function and cooking temperature.
2. Press CLOCK button until the END TIME symbol
appears flashing.
3. Set the desired time of day “Hours” to finish cooking by
pressing
or buttons while the END TIME symbol
is flashing.
4. Press the CLOCK button and the time of day “Minutes”
to finish cooking will flash and can be set in the same
manner.
5. After 5 seconds from last change, the END TIME symbol
will stop flashing confirming the cooking end time
is set.
6. The “Cooking end time” will be shown on the display.
7. When the set time has elapsed, a signal will sound and
the oven will turn off. To stop the signal, press any button
on the clock and then turn the oven FUNCTION selector
to “Off”.
NOTE: Cooking end time cannot be set for the Rapid Heat
function. The cooking duration can be cancelled at any time
by turning the “Function” selector to “Off”.
Setting the delayed start cooking time
1. Program the COOK TIME and END TIME as described
in the relevant sections. Once both the COOK TIME
and END TIME have been set, the COOK TIME and
END TIME indicators will stop flashing and the “Set
temperature” will be displayed.
NOTE: Do not forget to add pre-heating time if necessary.
Delayed start cooking time cannot be set for the Rapid Heat
function. The delayed start cooking time can be cancelled at
any time by turning the “Function” selector to “Off”.
Setting the minute minder
1. Press the
button and the “Minute minder” symbol
begins to flash.
2. Set the countdown time “Seconds” by using
or
buttons while the minute minder symbol is flashing.
3. Press the
button and the countdown time “Minutes” will
flash and can be set in the same manner.
4. Press the
button and set the countdown time “Hours”
will flash and can be set in the same manner.
5. After 5 seconds from the last change, the “Minute minder”
symbol
will stop flashing confirming it has been set.
5 button programmable clock (cont)
6. Once the set time has elapsed, a signal will sound for
1 minute. The time indication “0.00” and a flashing
“Minute minder” symbol
will appear on the display.
7. To stop the signal, press any button on the clock.
8. To cancel the minute minder, press the
button and the
display will flash. Then press and hold or buttons
together until the minute minder is cleared.
NOTE: This feature has no effect on the oven operation.
With the oven “Off” and minute minder operating, the time
of day cannot be displayed.
Elapsed time
When an oven function is selected (other than pyrolytic
clean), after 5 seconds the “Elapsed time” is displayed.
1. To reset the “Elapsed time”, press and hold both the
and buttons until the timer is reset.
Displaying the oven centre and set temperature (other than
pyrolytic clean function)
1. Press the TEMP. button when the oven is operating and
the “Oven centre temperature” is displayed.
2. Press the TEMP. button again within 5 seconds and the
“Oven set temperature” is displayed.
3. Alternatively, the TEMPERATURE selector can be toggled
left
or right for 1 second and the “Oven set
temperature” is displayed.
NOTE: This temperature is displayed for 5 seconds.
Light operation
1. At any time, the oven lamp can be switched on or off
by pressing and holding the
button for 5 seconds.
Activating the child-proof lock
When the child lock is engaged, the oven cannot be
operated and the door cannot be opened.
1. Switch the FUNCTION selector to “Off”.
2. Press and hold the CLOCK and
buttons at the same
time until the word ‘SAFE’ is displayed and a double
beep sounds. The word ‘SAFE’ will be replaced by a
padlock symbol on the display after 5 seconds.
De-activating the child-proof lock
1. Press and hold the CLOCK and
buttons at the same time
until a double beep sounds. This will commence to unlock
the door and after 5 seconds the oven is ready for use.
operating the programmable clock operating the programmable clock
14 OPERATING THE PROGRAMMABLE CLOCK Built-in Cooking Built-in Cooking OPERATING THE PROGRAMMABLE CLOCK 15
Switching the clock display ON and OFF
When the oven is off, the clock display can be switched on
and off.
1. Press together
and symbols for 2 seconds to switch
off the display.
2. Press together
and symbols for 2 seconds to switch
the clock display on again.
When the oven is off and the display is set to the ‘off’ state,
pressing the
or buttons will display the time of day for
5 seconds then turn off the display.
NOTE: If a timer mode is set or the oven is operating, then
it is not possible to switch the display off.
Safety cut-out feature
The oven will automatically switch “Off” if the temperature is
not adjusted or the appliance is left operating for a period of
time. The oven switches itself off after:
1. 12.5 hours when the temperature is set between 30°C
and 120°C.
2. 8.5 hours when the temperature is set between 120°C
and 200°C.
3. 5.5 hours when the temperature is set between 200°C
and 250°C.
4. 3.0 hours when the temperature is set at 250°C.
How to exit DEMO mode
The oven can be set to operate in a demonstration mode
(e.g. in a retail store). The oven will not actually heat if it
has been inadvertently supplied in this mode. The following
instructions demonstrate how to exit this mode.
1. Ensure the oven is “Off”. Press and hold the
button until
a beep sounds. The ‘Demo’ text on the display will flash.
2. While holding the
button, turn the FUNCTION selector
to the first oven function until another beep is heard.
3. Then turn the FUNCTION selector to the ‘Off’ position.
4. Release the
button.
5. Toggle and hold the TEMPERATURE selector to the right
until 3 beeps sound. The ‘Demo’ text will no longer
be displayed and the oven will function normally. If the
‘Demo’ text is still displayed repeat the above procedure.
Loading ...
Loading ...
Loading ...