Loading ...
Loading ...
Loading ...
34
Activation of the cooking zone timer function
• Touch (press) the Selection/Display area (2) (power level ¹0)
• Press
(6) relating to the cooking zone
Use the symbols
(5) to set the duration of the Timer,
which is displayed in the Zone/Display (4) during setting the
symbol
(6) is flashing
Note: wait 10 seconds without pressing any other command, so
that the Cooking Zone Timer will start.
Note: by pressing and holding
(6) , the cooking zone timer is
reset
If desired, repeat the operation for several cooking zones.
Note: each cooking zone can have a different Timer set; in the
display (4) he countdown of the cooking zone selected at that
moment will appear; if no zone is selected, pressing the Display (4)
will display the "STAND-ALONE" Timer countdown.
The countdown mode is the same as the "STAND-ALONE"
timer one (see previous paragraph "STAND ALONE" Timer)
When the timer has finished the countdown, an acoustic signal
sounds and the cooking zone switches off.
To switch off the Timer:
• select the cooking zone (2)
• set the duration of the Timer to
, using (5)
Power Limitation
The Power Limitation function allows the product to be used while
limiting its maximum absorption, adjusting the absorbed power in
all active cooking zones, ensuring the hob’s total absorbed power
doesn’t exceed the set maximum absorption level.
Note: the setting must take place with the hob off, without
pressing the ON/OFF (1) key, when the hob is connected to the
mains, or when the electric mains are reconnected within the
following 2 minutes.
To set the Power Limitation:
- press
(which will be flashing, only for the first 2 minutes
after powering of the product)
- continuing to hold down
press, one at a time, all the
areas of Selection/Display (2) of the cooking zones, anti-
clockwise starting from the front right zone (FR)
• each press will be accompanied by a short audible signal
• once all the Displays (2) have been pressed, it will be possible
to release the key
at this point:
• the Display (2) of the left rear zone (RL) will show in alternate
sequence the symbols
“C” and “0”, indicating that it is possible to
perform the setting:
select the Display (2-RL) then scroll on the Selection bar (3), until
the symbols ”C”,and ”8”,appear the Display (2-FL) will show the
current setting**
0 = 7.4 KW
1 = 4.5 KW
2 = 3.1 KW
** by default the setting is 7.4 KW
To change the Power Limitation setting
• press the Display (2) of the left front area (FL)
• then scroll on the Selection bar (3), to select the new setting
• to save the choice made, press the ON/OFF key (1), for 2
seconds; a prolonged audible signal will be emitted to confirm the
successful setting
Bridge Zones
Thanks to the Bridge function, the cooking zones are able to work
in a combined manner, creating a single zone with the same
power level. This function allows evenly distributed cooking with
large-sized pots and pans.
The front “Master” cooking zone can be used in combination with
the corresponding “Secondary” cooking zone at the back
(to check which zones are equipped with this function, see the
illustrated part of this manual).
To activate the Bridge Function:
• simultaneously select the two cooking zones you want to
use
• the Display (2) of the "Secondary” cooking zone shows the
symbol "
"
• using the Selection bar (3), it will be possible to set the Level
(Power) of exercise, which will be shown in the Display (2) of the
"Master” cooking zone
• to deactivate the Bridge Function simply repeat the same
activation procedure
Note: the Cooking Timer Zone, activated during the Bridge
Function, causes the automatic shut-down of both cooking zones,
as in this case they are considered a single combined area.
USING THE EXTRACTOR FAN
Switch-on
Press (touch) briefly ON/OFF (1) hob/extractor: the symbol
lights up;
continuing to press, all the available functions will become
visible for a few moments, e, after which only the main ones
will remain active; the others can be used, and will be
activated, subsequently, during use of the device.
IMPORTANT: all the available functions will be illuminated
with light intensity, which will become more intense only
when they are activated.
Press again to turn off
Note: This function has priority over the others.
Starting the extractor:
Touch (press) the Selection zone (12) to activate the extractor
Extraction speed (power):
The extractor is equipped with 3 levels of extraction speed (power)
Touch and slide your fingers along the Selection bar (3):
Loading ...
Loading ...
Loading ...