ODVILLA36T User Manual

Loading ...

Figure 8.4 Assembling Chimney Sections

• Supportthe pipeduringconstruction andchecktobe

sureinadvertentloadinghasnotdislodgedthechimney

sectionfromthereplaceoratanychimneyjoint.

• Attachastraightchimneysectionoranoffsettothetop

ofthereplace.

• Placeinneruetotheinsideofthechimneysectionbelow

it.Placetheoutercasingoutsidetheoutercasingofthe

chimneysectionbelowit.RefertoFigure8.4.

NOTICE: Chimney sections cannot be disassembled

once locked together. Plan ahead!

• Lockchimneysectionsand/oroffsets/returnstogetherby

pushingdownwarduntilthetopsectionmeetsthestop

beadonthelowersection.

• Pullonthetopsectiontomakesureitisfullyengaged

andwillnotseparate.

• Youmayuse#6or#8sheetmetalscrewsnolongerthan

1/2in.(13mm)tofastenchimneysectionstogether.Do

NOTpenetrateinnerue.

WARNING! Risk of Fire! You MUST use screws (pro-

vided) to fasten offset/returns to chimney sections to

keep the chimney parts from twisting. Failure to do so

could cause re.

• Fasten offset/returns to chimney sections. Insert the

screws(provided)throughthepredrilledholes.DoNOT

penetrateinnerue.

• Secure chimney returns with hanger straps provided;

fastentostudsorjoists.

• Verticalstraightrunsofchimneymustbesupportedevery

35ft(10.7m).

C. Assemble Chimney Sections

WARNING! Risk of Fire! DO NOT install substitute or

damaged chimney components.

• Use only those components described in this manual.

Substitute or damaged chimney components could impair

safe operation and cause overheating and re.

OutdoorLifestylesbyHearth&HomeTechnologiesInc.•4072-137RevK•10/15

Loading ...

User Manual - Page 26